Capsulock
power contacts
for power inserts
Capsulock
power contacts
for power inserts
Anti-shortcircuit loose wire proof
safety power contacts
-
-
The capsulock system
The capsulock system
Your power contacts are fully insulated in any condition
Your power contacts are fully insulated in any condition
The Syntax Capsulock power contacts are a decisive insulation system ensuring electrical safety on the power connections inside the SGH 8.1 and 16.1, even in case of exceptional events. This Syntax proprietary solution provides electrical insulation, making that each power contact on the SGH connector is individually insulated from other contacts and from the shell. It consists of a crimpable connection ferrule threaded into an insulating protection that encapsulates the metal ferrule itself.
The electrical insulation system of the Capsulock is made up of two coupling thermoplastic half-capsules that are snapped together and encapsulate the area with the crimped contact-to-cable connections, thus sealing the electrical leads and preventing the live wires from touching each other or from getting in contact with the inner or outer metal parts of the connector. Even in the unlikely event of a violent pull of the cable, the two Capsulock halves provide complete protection against short circuits. -
Capsulock
Capsulock
Front half-capsule, Electric ferrule,
Rear knurled half-capsule -
Capsulock
Capsulock
Electric ferrule crimped
onto the cable -
Capsulock
Capsulock
Front half-capsule screwed on the crimped electric ferrule and rear
half-capsule snapped onto front half -
-
Female power contact ready
to be connected on Capsulock protectionFemale power contact ready
to be connected on Capsulock protection -
Fully assembled system.
Female power contact has been connected on Capsulock protectionFully assembled system.
Female power contact has been connected on Capsulock protection -
-
Power inserts
Power inserts
All inserts are supplied with power contacts and Capsulocks included
All inserts are supplied with power contacts and Capsulocks included
The power contacts are pre-installed in the inserts.
Capsulocks are to be installed when wiring. -
Inserts with pre-installed power contacts
Inserts with pre-installed
power contactsCapsulock yet to be installed
Capsulock yet to be installed
The image shows the inserts from the wiring side
-
Inserts with pre-assembled power contacts and Capsulock connected
Inserts with pre-assembled power contacts and Capsulock connected
-
2,5mm˛ / AWG12
2,5mm˛ / AWG12
3p+N+E (4p 5w)
3p+N+E (4p 5w)
Power central insert
-
2,5mm˛ / AWG12
2,5mm˛ / AWG12
2p+E (2p 3w)
2p+E (2p 3w)
Power central insert
-
32amp 6mm˛ / 10 AWG
32amp 6mm˛ / 10 AWG
2p+E (2p 3w)
2p+E (2p 3w)
Power central insert
-
Would you like to know more about Capsulock power contacts?
Would you like to know more about Capsulock power contacts?
Here you will find the technical feautures
and codes for Capsulock power contacts.Here you will find the technical feautures
and codes for Capsulock power contacts. -
Overall dimensions
Overall dimensions
-
2.5 mm2 / 12 AWG
2.5 mm2 / 12 AWG
-
Electric
ferruleElectric
ferruleDimensions in mm
-
Front and Rear
half-capsulesFront and Rear
half-capsulesDimensions in mm
-
Assembled
CapsulockAssembled
CapsulockDimensions in mm
-
6 mm2 / 10 AWG
6 mm2 / 10 AWG
-
Electric
ferruleElectric
ferruleDimensions in mm
-
Front and Rear
half-capsulesFront and Rear
half-capsulesDimensions in mm
-
Assembled
CapsulockAssembled
CapsulockDimensions in mm
-
